The HOBO U-DT-2 U30 Shuttle Data Transporter provides convenient in-field data offload and relaunch of HOBO U30-NRC systems and HOBO Weather Stations (H21), Micro Stations, and HOBO Energy Logger systems (H22). The U30 Shuttle's 2 x 16-character display shows current readings (for selected data loggers), and logger status.

• Reads out data from systems in the field for transfer to a host computer
• Optionally relaunches the data logger — synchronizes the logger’s clock with the shuttle’s clock and (in most cases) sets logging to begin at the next interval
• Preserves data in nonvolatile memory, even if batteries are depleted
• Displays logger status, including memory, battery level, and sensor readings
• Displays its own status, including clock, memory, and battery level
• Lets you change the batteries in the field without resetting the clock
• Allows you to test individual smart sensors

Includes:

• (1) Data Logger Cable, and USB Cable

Specifications:

• USB cable (provided); compatible logger with appropriate cable and/or base station
• U-DT-2: HOBOware 2.6 or greater

• Compatibility: HOBO U30 series systems, HOBO Weather Stations and Micro Stations (H21), and HOBO Energy Logger (H22)
  Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
  Operating temperature: 0° to 50°C (32° to 122°F)
  Storage temperature: -10° to 50°C (14° to 122°F)
  Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A

Logger-to-Shuttle Transfer Speed

• USB: 64K in approximately 30 seconds
• Serial: 512K in approximately 60 seconds
• Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
• Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 7 readouts of 512K loggers
• Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware (see HOBOware User’s Guide for details) or changing logger batteries (10 minutes)

Ports: 

• RJ-12 jack for communicating with smart sensors
• Mini-B full speed USB port for communicating with host computer
• Full speed USB port for communicating with U-Series loggers and base stations
• High speed serial port for communicating with serial loggers
• Shuttle communicates with only one device at a time

Batteries

• Main: 2 AA alkaline batteries
• Clock backup: 1 CR1225 lithium battery (3 V)

Battery Life

• Main: One year or approximately 50 complete memory fills, typical use
• Clock backup: 10 years typical use (with main batteries installed)