The economical Water Tape water level indicator is used for measuring the depthof water in wells, boreholes and standpipes. The Water Tape will signal water  with a bright LED light and solid tone buzzer allowing the user to make water level measurements accurate to 1/100th ft or to each millimeter. The Water Tape signals when contact is made with water, the water shorts the probe tip and body to complete a circuit. There is no on/off switch. The switch is the water

The Water Tape uses a high quality polyethylene tape that is indelibly heat stamped with markings in engineering scale in either feet and tenths or meters and centimeters. This rugged tape is reinforced with Kevlar fibers for strength and the stranded stainless steel conductors within the tape are non-corrosive  ensuring the long life of the unit. The flexible tape winds smoothly onto the tough Nylon reel, and hangs straight in the well.

The Water Tape includes a fully potted, fully field removable electronic module. The super bright red LED and buzzer are housed inside this water tight module.The electronic circuit converts the DC battery current to an alternating current;this prevents corrosion and mineral build up on the probe. The Water Tape works on one 9 volt battery in an easy access battery drawer mounted on the front of the module.

The Water Tape comes with a standard 5/8” (1.6cm) diameter fully submersible, leak proof probe up to 1500ft/450m. The Water Tape probe hasbeen especially designed for easy cleaning by removing any holes and recesses that would allow for the build up of contaminates. The stainless steel probe is 7” (18cm) in length and is attached to the tape using a flexible linking device that allows the tape and probe to be protected at this vital junction

The Water Tape is a well balanced unit. The stand alone, sturdy steel frame is coated in Polyurethane for durability. The Vinyl coated carry handle isergonomically designed for comfort and easier rewinding. The reel flanges and center hub are molded from high strength Nylon turning on a stainless steel axle allowing the smooth running of tape up and down the well or borehole. The third hand well casing hanger and tape guide are standard features on all Heron water level indicators.

• (1) Heron Water Level Meter Tapes with 5/8" Probe, 300m
  
• (1) Canvas carrying bag

• Reel Weight: 5 lbs (2 Kgs)
• Well Tape per 100ft (30m): 1.0 lb (0.5 kgs)
• Height: 13.5 in (340 mm)
• Width: 10 in (250 mm)
• Depth: 8 in (200 mm)