The design of the MetPak RG allows all measurements to be as accurate as possible without influencing other measured parameters yet provides a complete, compact, reference quality system. In addition to the rain gauge parameter the MetPak RG utilises the Gill WindSonic ultrasonic technology to measure wind speed and direction and a highly accurate barometric pressure sensor is housed within a vented enclosure. Temperature and humidity are measured using a Rotronic Hygroclip HC2-S3 temperature/humidity probe contained in a naturally aspirated radiation shield. The unit is especially suitable for harsh or marine environments. The MetPak RG weather station is supplied with digital SDI-12, RS232 & 422 outputs. The serial data output is ideal for interfacing with a WS-15A Display Unit. Data from the MetPak RG can be stored using the SpaceLogger.W10 (WindLogger) and SpaceLogger.W8.Wireless data loggers providing a compact affordable logging solution for long term data collection. Low power consumption enables this weather station instrument to be used in remote locations where power is at a premium.An electrical junction box is fitted to the mounting bracket allowing convenient termination of all electrical cables

• Wind Speed & Direction
• Temperature
• Humidity
• Barometric Pressure
• Dew Point
• Precipitation
• SDI -12 Output
• Gill ASCII Output

• Gill Instruments MetPak RG Weather Station

Specifications:

• Wind Measurement: Sensor: WindSonic ultrasonic; Parameters: Polar Wind Speed & Direction or U & V Vectors
• Wind Speed: Range: 0-60m/s (134 mph); Accuracy: ± 2% @12m/s; Resolution: 0.01 m/s (0.02 mph): Threshold: 0.01 m/s (0.02 mph); Units of measure:m/s, knots, mph, kph, ft/min
• Wind Direction: Range:0 to 359 degrees – no dead band; Accuracy: ± 3° @12m/s; Resolution: 1°
• Air Temperature: Sensor: Rotronic HygroClip model HC2-S3; Sensor type: Pt100 1/3 Class ; Range: -35°C to +70°C; Accuracy: ± 0.1°C; Resolution: 0.1°C (0.1°F): Units of measure: °C, °F or K.
• Relative Humidity: Sensor: Rotronic HygroClip model HC2-S3. Compensated for temperature dependency; Range: 0-100% RH; Accuracy: ± 0.8% @23°C; Resolution: 0.1% RH; Units of measure: % RH
• Barometric Pressure: Sensor: Solid state device. Compensated for temperature dependency -20°C to +70°C; Range: 600-1100hPa; Accuracy: ±0.5hPa; Resolution: 0.1hPa; Units of measure: hPa, mbar, mmHg, InHg
• Precipitation: Measurement Concept: Aerodynamic tipping bucket rain gauge; Range: Effectively unlimited; Resolution: 0.2mm; Units of Measure: mm per tip.
• Dew Point: Sensor: Rotronic HygroClip model HC2-S3; Accuracy: ± 0.15°C @ 23°C ambient temp, 20°C dew point; Resolution: 0.1°C (0.1°F); Units of measure: °C, °F or K.
• Outputs: Digital outputs: RS232, RS422 or SDI-12; Baud rates:  200 (SDI-12) – 4800-57600 (ASCII RS232, RS422); Protocols: ASCII or SDI-12 V1.3; Data output: 1Hz, 2Hz, 4Hz or polled mode Mechanical; External construction: UV stabilised white thermoplastic
• Mechanical: External construction: UV stabilised white thermoplastic; Mounting: Pole Mounting:Gloss white painted aluminium mounting bracket (with moulded plastic V-block and stainless steel U-bolt), which allows it to be attached to a vertical pipe of any diameter between 25mm and 50mm. Weight: 2.1kg (including bracket); Radiation shield: 6-plate, naturally aspirated
• Power Supply: Supply voltage: 5V to 30 V dc; Current: <16mA (Output 1 second) @ 12 V
• Power Supply: SDI-12; Supply voltage; 12V nominal (9.6 – 16V); Current; < 6.5MA low power operation
• Environmental: Protection class: IP65; Operating temperature: -35°C to +70 °C; Storage temperature: -40°C to +80 °C; Operating humidity: 0% to 100% humidity Miscellaneous; Calibration;Factory calibrated
• Miscellaneous: Calibration: Factory calibrated; Software: MetView - free software providing the means for configuring the MetPak II and reading output data.