The AdirPro HV8RL is a rotary laser that comes with an accessory kit, all packed in a hard plastic protective case with foam padding to protect all the components.. Included in the package is the actual rotary laser, HV8RL rotary laser, (4) rechargeable batteries, a battery charger, (2) Alkaline C batteries, a wall mount for the laser, the AdirPro LD-8 Laser Detector, (1) 9V battery for the detector, a detector bracket, a remote control, (2) AAA batteries for the remote control, laser target, laser glasses

The HV8RL Rotary Laser
This horizontal/vertical rotary laser is ideal for interior installations (walls, cabinets, lighting, windows), leveling (decks, pools, patios), plumb reference, and both horizontal and vertical alignments.

Features
The GV8RL laser is self-leveling, so long as it’s within 5 degrees of the leveling range. If the beam is set to higher than 0 RPM and the laser does not begin to rotate after a couple of minutes, readjust your unit to place it within that range. The laser can be set to spin clockwise or counterclockwise. The control panel gives you access to this function along with the power button, the ability to set the RPM, direction scan, and windy function. Additionally, you can choose to manually adjust the slope of either the X-axis or the Y-axis (or both, one at a time) by selecting the axis and using the up and down arrows to make the adjustment. You can also turn on the alert mode that will notify you if the unit was jolted. 

Another handy feature is the 5/8” mounting thread nut at the bottom of the unit which allows you to secure your laser to most tripods.

This unit can be used with 4 dry/Alkaline C batteries or the rechargeable Ni-mh battery pack included. The battery compartment is opened by turning the knob around the mounting nut counterclockwise. The chargeable batteries can be charged with the charger included (FC100). It can be plugged in either from the control panel’s port or from the port inlayed in the rechargeable battery plate. This allows you to charge the batteries while the batteries are in the unit, or when the pack is removed (allowing you to use the unit even while it’s charging).

Features:

- Dual display
- Auto shut-off
- Approx 40 hours of use
- Built-in bubble level
- 1/4 thread mounting nut
- Includes rod clamp

What's in the Box

- (1) AdirPro LD-8 Universal Rotary Laser Detector
- (1) Clamp
- (2) AA batteries

Brochure/Datasheet

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu